I wanted to ask, if there is a way to have no overlapping items, when the items do not have overlapping times, but the display units are bigger than 1 minute.
Overlap calculation in the VCL Planner is based on timeslots, i.e. if you have 15min timeslots, it will consider everything in this 15min timeslot as overlapping.
Our TMS FNC Planner overlap calculation is based on exact start/end time, independent from timeslot size, so this could be considered.
Thank you so much for pointing me to the FNC Planner. I will try it with the trial and if it works, I will buy it. Will take a look at the bundle if there are more components of interest for me.
Just about to try out the FNC Planner. I cannot find the property where I can set the timeline to the top. I would need the timeline on the top and the positions on the left.
Please set FNCPlanner.OrientationMode = pomHorizontal
Thank you, that works. Just another question. There is no timeline mode. Which mode is best to use, if you want to have a timeline that represents between 1 to 10 days (changable during runtime) and have the units set to hours or couple of minutes, depending on how many days are selected to display?
I think best would be to use DayPoriod. Am I right?
DayPeriod can be used, but may I ask to move FNC Planner related questions to the FNC specific forum so that my colleague sees this and can also follow up?
Thanks and sorry. Did not realise, there is another forum. Will post my questions there.